Steel Valves SEO

A Steel Valve SEO Blog on China Made Steel Valves

July, 2013

Cast Steel Digital Locked Balancing Valve

This type of cast steel digital locked balancing valve features flowing equally, the bigger the opening, the bigger the flow while the smaller the opening the smaller the flow. The cast steel digital locked balancing valve is perfectly suitable for various applications, such as liquid pipeline systems, and is an ideal brand-new energy-saving valve, set [...]

Tags: , ,

Posted in Products | Comments Off

Cast Stainless Steel Knife Gate Recycle Valve

Recycle and rejects services are usually tough on valves. Over the years many new and often expensive valve configurations have been thrown at these applications without much success. Eventually, this new type of cast stainless steel knife gate valve is designed to address the specific service problems found in recycle and rejects service; it is [...]

Tags: , ,

Posted in News | Comments Off

API 598 Pump Control Valve

This new type of API 598 pump control valve eliminates damaging water surges (hammer) caused when pump starts up and shuts off. The electrically activated valve gradually opens when pump starts up, and slowly closes before the pump is switched off. The valve also operates as a slow control check valve, preventing reverse flow and [...]

Tags: , ,

Posted in Products | Comments Off

API 6D Cast Steel Orbit Plug Valve

This new type of API 6D cast steel orbit plug valve is bi-directional, with bolt bonnet and OS&Y lifting-round plug. Its sealing is realized by the sealing rings around the valve disc.It has unique protection of swallow tailed sink and fixed sealing rings. when the valve is fully opened,the channel of plug is in alignment [...]

Tags: , ,

Posted in Products | Comments Off

Carbon Steel Media Containment Bonnet

This type of carbon steel media containment bonnet, also called media containment unit, is designed for three-piece valves. To install it, it requires removing valve handle or actuator to insure that the thin packing nut or stem nut is retained by the locking washer, a washer with tab bent to contact one flat of the [...]

Tags: , ,

Posted in Products | Comments Off

API 600 Bolted Lengthen Bonnet Gate Valve

This type of API 600 bolted lengthen bonnet gate valve is designed in accordance with the standards of API 600, API 6D, BS 1414. It shares the features of a bolted lengthen bonnet, threaded seat ring and welded seat ring. It also has full bore, OS&Y, rising stem as well as a flexible wedge. Besides, [...]

Tags: , ,

Posted in Products | Comments Off

ANSI 150 Cast Steel Gate Valve

This type of ANSI 150 cast steel gate valve is made of WCB, CF8M, and various alloys, designed according to API 600, with OS&Y, bolted bonnet, flanged and butt-welded ends, up to the dimensional standards of ANSI class 150 – class 2500. The ANSI 150 cast steel gate valve features flanged ends to raised face, [...]

Tags: , ,

Posted in Products | Comments Off

Clean Flow Bellow Sealed Globe Valve

The clean flow bellow sealed globe valve meets the USDA and3Arequirements. The standard version is designed for PN16, one body with different bonnet options for various applications, supplied for Clean In Place (CIP) and Steam In Place (SIP), with various end connection and aseptic diaphragm options. The type of clean flow bellow sealed globe valve is the [...]

Tags: , , , ,

Posted in Products | Comments Off